How to Replace saab replacement key For the Saab 9-3
Saab owners have to follow a series of unique steps to add an additional ignition key. It requires dealer service using a handheld computer called Tech-2. Then it is necessary to purchase a new transponder. key must be purchased.
Change your keys regularly to prevent one from wearing out quicker than another. This will help keep your keys in perfect condition.
Replacement Case
Contrary to the classic Saab keys of old keys, the modern key fobs are equipped with electronics that make it difficult to duplicate. This has made theft of cars considerably more difficult than it was twenty years ago. It also makes it more expensive to replace keys lost.
Saab 9-3 owners should have two working keys. If one gets lost, it is expensive to purchase a new one for the car since it requires replacing the CIM module, and then reprogramming the locking cylinders. Dealers usually charge between $100-$200 for this.
There are options to avoid these costly costs. Some parts suppliers will use the code of an old key to cut a new metal blade for a fraction of the cost of the dealer. The key must, however, be identical to the original in order to function in your car.
Follow these steps to replace the case. You'll require a flathead and a lot of patience. With the screwdriver, pry apart the plastic and remove the emergency key. After the case is open remove all electronics and put them back in the new case. Make sure you insert the correct key and badge into the case.
Replacement Battery
The replacement battery for the Saab 9-3 is a cheap component that can be replaced easily and quickly. This YouTube DIY video user Cyclone Cyd explains how to replace the remote key fob battery in only four steps. This tutorial is suitable for any modern saab-type key fob, however the procedure might differ slightly.
This button is usually located near the Saab logo on the back of the fob. This is usually located next to the Saab logo on the back of the fob. Use a flathead to insert the screwdriver into the tiny hole on this button. This will allow you to open the fob's case to allow you to replace the battery.
After the new battery CR1632 is installed You can then reassemble the remote key fob and program it to your car. The entire process should not take more than a half hour at the most. This is a straightforward procedure that doesn't require special tools.
The process is more complicated in the event that you lose your key, but still possible. The dealer must first read the VIN of the vehicle and order the replacement TWICE module as well as key blade with the correct unique code. The dealer will then have to program the key using MDI, a new software tool.
Key Replacement Fob
The key fob is the part that locks and unlocks your car, it has an internal battery. Batteries have a limited lifespan and eventually die. This is a regular issue that occurs with all vehicles and the good thing is that you can replace the batteries in many key fobs without having to replace the entire case. You can purchase replacement fobs from Amazon that come with all the electronics already installed, so you can simply open the case and replace the batteries that were in the case. You'll need to remove the emergency key before you can replace the batteries. To do this, you need to insert the screwdriver of a small flat head into the slot that is in the middle. Use the screwdriver to move around the case, and it should split open, making it easier to take it out.
If you are about to replace the keys ensure that you have spare keys, as this will reduce your total cost by a substantial amount. If you have an extra key, ask the dealer to cut it and program it to your car. This is less expensive than purchasing a new fob.
If you do not have a spare key you can add a second key to your car, however this requires a lot of research and effort. Adding a second key costs about a few hundred dollars and also requires programming of the car's computer. This can be done by a professional, however it's an expensive option for the majority of owners.
Replacement Ignition
As opposed to the earlier Saab automobiles, the current SAAB 9-3 models have an extremely sophisticated alarm system that is dependent on a coded keys. This means that when you lose your sole working key, replacing it with another one can be very expensive as the car has to have a unique computer module installed, and it also must be specially programmed to accept an extra key. Locksmiths typically aren't able to program this and even a dealer will charge several hundred dollars just to program the new key!
Dealers will charge you a high price to replace your car's computer (also known as the CIM or SAAB twice) in the event that you lose your only functioning key. We can reprogram the EEPROM inside your car's computer to make it ready to accept an additional key. This will save you more than 50% of the cost you would have to pay an auto dealer.
If you have owned a 9-3 from SAAB for quite a while and you're aware of the ignition keys aren't very durable. If your ignition key isn't working properly, you should think about replacing it. They can become extremely sticky and the buttons have been known to fall off. It's not as difficult as it seems to replace the ignition key. With the proper tools, it can be done quickly.